Learning Outcomes

Introduction to Gas Turbines

Thermodynamics of Gas Turbines

Configurations

Lesson Summary

In this module, you will be introduced to the components, advantages and disadvantages of a gas turbine, as well as laws and principles that apply to gas turbines. You will also be introduced to Bernoulli's principles, Boyle's law, Charle's law, types of gas turbine cycles. As well as the types of gas turbine configurations which include: single-shaft, split-shaft and twin-spool turbines.

Construction of Gas Turbines

Compressor Section

Combustion Chamber

In this module, you will be introduced to the constructional features, as well as materials used for the construction of gas turbines they include; special steels, titanium alloys and superalloys. You will also be introduced to the functions of axial flow and centrifugal compressors in gas turbine operations, the two main components of the axial compressor which are; rotor and stator blades>. Along with the types of combustion chambers and oil seals in a gas turbine.

Diploma in Marine Gas Turbines - First Assessment

Starting Systems

Lubrication Systems

Fuel System

In this module, you will be introduced to starting system procedures, electric starting methods, as well as pneumatic starters, and operations of a pneumatic starter. You will also be introduced to the two types of lubricating oil, types of lubricating systems which include; dry-sump and wet-sump lubrication. As well as types of fuels oil to use in a gas turbine engine, fuel injection system, and spark ignition system.

Drive System

Epicyclic Gearing

Bleed Air Systems

Instrumentation and Control Systems

In this module, you will be introduced to the different arrangements in GT which include; single-shaft, split-shaft, and dual-shaft as well as the use of gears, gear teeth design, and the basic elements of epicyclic gears. You will also be introduced to the advantages of multiple planets, functions of the bleed air system, intake and exhaust systems of a gas turbine. As well as components, functions, and data processing systems of the ACOS.

Diploma in Marine Gas Turbines - Second Assessment

Diploma in Marine Gas Turbines - Course Assessment

This free online course covers the working principles, components and operations of marine gas turbines.

Diploma in Marine Gas Turbines

The materials used to construct marine gas turbines, as well as their components and working principles, are the main parts of this free online course. You will learn about the functions of the combustion chamber, turbine rotors, stators and accessory drive arrangements. You will also be able to explain starting systems, as well as bleed air systems. Start this course today to improve your ability to design and repair marine gas turbines.

‘Diploma in Marine Gas Turbines’ is a free online course that introduces you to how a gas turbine works plus the functions of its main components, including the compressor, combustion chamber and turbine. You will work through the present applications of gas turbines (or GT technology) in the marine industry, as well as the differences between steam and gas engines. Learn about the advantages and disadvantages of a gas turbine, as well as the current trends in marine engine applications. This course will teach you about three main gas laws and principles - which include Bernoulli’s principle, Boyle’s law, and Charles’s law - as well as the different stages of the convergent-divergent process. The Brayton cycle - as well as other cycles used for operations like intercooling, intercooling recuperated, reheating, intercooling reheating cycle and the combined cycle - will also be explained. The material will ground you to the different types of gas turbine configurations such as single-shaft, split-shaft and twin-spool engines.
This course then explains the constructional features of a gas turbine, as well as the three main sections comprising the compressor, combustor and turbine itself. You will also learn about the functions, working principles and components of the axial flow and centrifugal compressors. Then, study the two types of axial compressors (drum-type and disk-type compressor rotor) as well as the elements of an axial flow compressor (the rotor and stator). You will analyze the functions and working principles of the combustion chamber, as well as its three main types, which include can, annular and can-annular. This course will teach you about the various functions of the accessory drive section of a gas turbine, as well as the ball and roller bearings. The functions, working systems, and pros and cons of three types of oil seals - lip-type, labyrinth, and carbon ring - will also be covered by the material.
Furthermore, this free course will help you get familiar with starting system procedures and precautions for gas turbines, as well as developments in the electric start system. You will tackle the features, functions and operations of pneumatic starters, as well as the disadvantages of hydraulic starting systems. The dry-sump and wet-sump lubrication systems will also be analyzed. Master the functions and types of epicyclic gears like star, planetary and solar gears. You will also be familiarized with the advantages of using multiple-planet wheels, as well as the functions and types of clutches, including twin-disk, airflex, hydraulic, sprag and SSS clutch. The purpose of the bleed air system, as well as the functions of the intake and exhaust system, will be explained. Then learn about the functions, components and data processing system of the automated central operating systems (ACOS). The course will benefit marine engineering students and those wanting more in-depth technical knowledge of gas turbines with the marine environment.

6,000+ Online Courses from California Community Colleges: A New Search Tool by Class Central

Udemy Q4 2025: First Profitable Year Ends in a Loss

262K Courses, 833M Enrollments: Breaking Down Udemy’s Massive Catalog

[2025] 2000+ Free SWAYAM + NPTEL Courses

Coursera and Udemy are Finally One. What’s Next?

9 Best Cinema 4D Courses for 2025: Navigating the 3D Universe

11 Best Applied AI & ML Courses for 2025

From Zero to Cybersecurity Analyst: How Google’s Certificate Can Launch Your Career

40+ Free Certificates from Wolfram U: Expand Your Computational Universe

Open edX Conference 2026: Program, Workshops & Registration

10 Best Programming Courses for 2025

Duolingo is Shutting Down Its Only Classroom Tool

7 Best Kubernetes Courses for 2025

Udemy Announces Layoffs Without Saying ‘Layoffs’

15 Best Lisp Courses for 2025

Writing as Enchantment: Inside Alan Moore’s BBC Maestro Course

Aims & Objectives of ISO/IEC 17025:2017

Accrediting to ISO/IEC 17025:2017

Main Sections of ISO/IEC 17025:2017

This module presents the fundamental aspects of ISO/IEC 17025:2017 along with its aims and objectives. The module also explains different forms of standardized verbs used throughout the standard. Moreover, you will also learn the benefits of accrediting to ISO/IEC 17025. Lastly, an overview of the section's standard is also given.

General and Structural Guidelines for Laboratories

Resource Requirements for Testing Laboratories

Contracts, Validation, Sampling & Handling

Technical Records, Uncertainty, Results Validity, & Reports

In this module, you will encounter the essential requirements given in clauses 4, 5, 6, and 7 of ISO/IEC 17025;2017. However, the explanation of Clause 7 is provided till sub-clause - 7.8. Through this module, you will learn about the general, structural, resource, and process requirements of ISO/IEC 17025:2017.

Information Management, Complaints & Nonconformities (NCs)

Management System Requirements

Taking Corrective Actions

In this module, you will see discussions on ISO/IEC 17025:2017 beginning from sub clause 7.9 that puts forward the complaint requirements put forth by the standard. Furthermore, it presents the standard's requirements regarding management systems. Moreover, it also contains necessary measures to be taken for corrective actions.

ISO/IEC 17025:2017 - Laboratory Management System- Course Assessment

Learn about laboratory management systems laid out by the ISO 17025 international standard in this free online course.

ISO/IEC 17025:2017 - Laboratory Management Systems

This short course is designed for individuals and laboratories looking forward to their standardisation. We explain management standards defined by the ‘ISO/IEC 17025 general requirements for testing and calibration laboratories competence’ devised by ISO. This comprehensive course explains all the basic and essential requirements of the standard. It also provides a simplified clause-by-clause explanation of its four main sections.

Fundamentals of Pest Control

Pest Identification and Assessment

Non-Chemical Pest Control Methods

Chemical Pest Control Methods

This module will teach you the fundamentals of pest control, types of pests and their impact, pest life cycles and behavior, factors influencing pest infestations, pest identification and assessment, non-chemical pest control methods, genetic control and sterile insect, chemical pest control methods, and integrated pest management (IPM) approach.

Monitoring and Prevention

Sustainable Pest Management

Urban and Structural Pest Control

Topics you will learn in this module include but are not limited to pest monitoring techniques, preventive measures and exclusion strategies, ecological impact of pesticides, selective pesticide use and resistance management, organic and biodynamic pest management, pest management in residential areas, and commercial and industrial pest control.

Pest Control and Management - Assessment

This free online course teaches you how to use chemical and non-chemical pest control techniques to manage infestations.

Pest Control and Management

Pests make environments unhygienic and are a major cause of diseases, some of which may be lethal and difficult or expensive to cure. Effective pest management and control are necessary to keep a living and working environment free from health hazards. This course provides the knowledge and skills required to establish and maintain a successful pest control management programme and describes various pests, their life cycles and their behaviour.

Foundations of Construction Safety Management

Safety Management for Hazardous Environments

High-risk Site Activities and Demolition Safety

This module covers risk identification and mitigation in construction work and how to evaluate and manage risk in compliance with CDM regulations. You'll also learn how behaviour affects safety on construction sites, including safety measures for scaffolding, excavation, demolition and more.

Course Assessment - Site Management Safety Training Scheme (SMSTS)

Learn how to manage safety on construction sites in accordance with UK legal provisions in this free online course.

Site Management Safety Training Scheme (SMSTS)

Construction workers are often vulnerable to injuries and hazards so ensuring safety is maintained consistently is crucial for both site managers and workers. This course covers the essential knowledge needed for maintaining safety on construction sites. You'll learn to identify and assess risks while adhering to UK industry regulations. In addition, we'll discuss safety measures to take during erecting scaffolding, excavations and demolitions.

Introduction to Hot Work

Classification of Hot Work Areas

Roles and Responsibilities

Hot Work Permit

Hot Work Risk Assessment

Essential Safety Precautions

This module will familiarize you with hot work processes, including their potential hazards and safety precautions. You'll learn how to assess the risks associated with hot work and determine appropriate control measures. You'll also understand the hot work permit system and the roles & responsibilities of those involved in the permitting process.

Hot Work Safety - Course Assessment

Learn how to manage the hazards associated with hot work processes in this free online health and safety course.

Hot Work Safety

This hot work safety training equips you with the essential knowledge to recognize and mitigate hot work hazards. You'll understand the hot work risk assessment process and hierarchy of controls for effectively reducing risks. The course explains the hot work permit system along with the roles and responsibilities of those involved in the permitting process. You'll also gain a clear understanding of hot work permitted and prohibited areas.

Introduction to Traffic Marshalling

Traffic Management

Temporary Traffic Control

Traffic Risk Assessment

Vehicle Signaling

Reversing Vehicles

Health and Safety

In this module, we will look at the fundamental objectives of traffic marshalling and the general duties of a traffic marshal. A traffic marshal's responsibilities when controlling traffic on a highway or construction areas shall be examined. Assessing risks along with health and safety concerns of traffic near construction areas will be assessed.

Construction Safety: Traffic Marshalling - Course assessment

Train as a traffic marshal or bankman who provides traffic management on construction sites in this free online course.

Construction Safety: Traffic Marshalling

This course takes an in-depth look at the role of traffic marshals on construction sites. Traffic management is important to maintaining health and safety as the presence of heavy machinery and large vehicles creates a need for the efficient direction of traffic. Traffic management in such a busy area faces hazards and safety risks, which we identify in this course. Sign up to train as a traffic marshal or bankman and add a skill to your CV.

Introduction to the AS Standards

Organization's Context and Leadership

QMS Planning and Support

This module introduces students to the AS standards for suppliers of the aviation industry. It explains the importance of regulations in the aerospace industry and navigates them through the journey of different AS standards. It also explains the requirements of Clauses 4, 5, 6, and 7 of this standard.

Organizational Operations

Operations and Evaluation

Organizational Improvement

This module explains the requirements of Clauses 8, 9, and 10 of AS9100D. These requirements are regarding organizational operations, evaluation, and continuous improvement of the organizational operations.

AS9100D Quality Management System (QMS) for Aerospace Industry - Course Assessment

Learn the requirements of AS9100D for the developers and suppliers of components for the aerospace & defense industries.

AS9100D Quality Management System (QMS) for Aerospace Industry

This course explains different clauses and their various requirements for the organizations that develop, design, or supply parts, components, and assemblies concerned with the aerospace and defense industries. After enrolling, the students will be able to navigate the differences between the different versions of the AS standards. Moreover, they will also get a simple and straightforward explanation of this standard's requirements.

Introduction to Hazardous Materials Handling - Learning Outcomes

Understanding Hazardous Materials

Legal and Regulatory Compliance

Importance of Hazard Communication

Risk Assessment and Management

Personal Protective Equipment (PPE) for Hazardous Materials Handling

Introduction to Hazardous Materials Handling - Lesson Summary

In this module, participants will have a solid foundation in understanding hazardous materials, legal and regulatory compliance, hazard communication, risk assessment, and the proper use of personal protective equipment. This knowledge is essential for creating a safe and compliant working environment in industries dealing with hazardous materials.

Hazardous Materials Storage and Transportation - Learning Outcomes

Proper Storage Practices for Hazardous Materials

Managing Segregation and Compatibility of Hazardous Materials

Emergency Preparedness for Hazardous Materials Storage

Transportation Regulations

Handling Hazardous Materials in Transit

Emergency Response Planning

Case Studies and Lessons Learned

Hazardous Materials Storage and Transportation - Lessons Summary

This module covers storing hazardous materials, segregation and compatibility, and developing emergency response plans. Learn DOT regulations, proper labelling, packaging, and security measures for transportation, best practices for loading/unloading and case studies.

Advanced Hazardous Materials Handling Techniques - Learning Outcomes

Decontamination Procedures

Confined Space Entry Protocols

Managing Hazardous Waste

Best Practices for Chemical Spill Response

Continuous Improvement in Hazardous Materials Handling

Advanced Hazardous Materials Handling Techniques - Lesson Summary

This module covers decontamination techniques to ensure health, safety, and regulatory compliance. Learn to manage decontamination zones, handle confined space hazards, and apply physical, chemical, thermal, and radiological decontamination. Develop skills in PPE selection, emergency response planning, and environmental protection.

Hazardous Materials Handling Mastery - Course Assessment

Gain expertise, ensure safety, and excel in hazardous materials handling with this comprehensive free online course.

Hazardous Materials Safety Specialist

This course covers the classification, legal compliance, and risk assessment of hazardous materials. It delves into communication standards, PPE usage, and storage guidelines. Transportation regulations and emergency response planning are also covered. Advanced techniques include decontamination, confined space entry, hazardous waste management, chemical spill response, and continuous improvement through safety audits and case studies.